Cisco Nexus
Collect logs from Cisco Nexus with Elastic Agent.
Version |
1.0.1 (View all) |
Compatible Kibana version(s) |
8.7.0 or higher |
Supported Serverless project types |
Security Observability |
Subscription level |
Basic |
Level of support |
Elastic |
Overview
The Cisco Nexus integration allows users to monitor Errors and System Messages. The Cisco Nexus series switches are modular and fixed port network switches designed for the data center. All switches in the Nexus range run the modular NX-OS firmware/operating system on the fabric. NX-OS has some high-availability features compared to the well-known Cisco IOS. This platform is optimized for high-density 10 Gigabit Ethernet.
Use the Cisco Nexus integration to collect and parse data from Syslog and log files. Then visualize that data through search, correlation and visualization within Elastic Security.
Data streams
The Cisco Nexus integration collects one type of data: log.
Log consists of errors and system messages. See more details about errors and system messages
Requirements
Elastic Agent must be installed. For more information, refer to the link here.
The minimum kibana.version required is 8.7.0.
This module has been tested against the Cisco Nexus Series 9000, 3172T and 3048 Switches.
Setup
To collect data from Cisco Nexus, follow the below steps:
NOTE:
- Configuration steps can vary from switch to switch. We have mentioned steps for the configuration of the 9K series of switches.
- Use the Timezone Offset parameter, if the timezone is not present in the log messages.
Logs Reference
Log
This is the Log dataset.
Example
An example event for log looks as following:
{
"@timestamp": "2023-04-26T09:08:48.000Z",
"agent": {
"ephemeral_id": "81553388-678e-4d17-8f75-7c7870f7f06c",
"id": "45b4f828-da65-463c-980e-09ba9a67922b",
"name": "docker-fleet-agent",
"type": "filebeat",
"version": "8.10.2"
},
"cisco_nexus": {
"log": {
"description": "EARL 0 NF ASIC: Uncorrectable Parity error in Netflow Table.",
"facility": "EARL",
"priority_number": 187,
"severity": 3,
"standby": "SW2_DFC1",
"switch_name": "switchname",
"time": "2023-04-26T09:08:48.000Z",
"timezone": "UTC",
"type": "NF_PARITY_ERROR"
}
},
"data_stream": {
"dataset": "cisco_nexus.log",
"namespace": "ep",
"type": "logs"
},
"ecs": {
"version": "8.11.0"
},
"elastic_agent": {
"id": "45b4f828-da65-463c-980e-09ba9a67922b",
"snapshot": false,
"version": "8.10.2"
},
"event": {
"agent_id_status": "verified",
"category": [
"network"
],
"code": "NF_PARITY_ERROR",
"dataset": "cisco_nexus.log",
"ingested": "2023-10-03T09:37:59Z",
"kind": "event",
"original": "<187>switchname: 2023 Apr 26 09:08:48 UTC: %EARL-SW2_DFC1-3-NF_PARITY_ERROR: EARL 0 NF ASIC: Uncorrectable Parity error in Netflow Table.",
"severity": 3,
"type": [
"info"
]
},
"input": {
"type": "tcp"
},
"log": {
"level": "error",
"source": {
"address": "192.168.0.5:48836"
},
"syslog": {
"facility": {
"code": 23
},
"priority": 187,
"severity": {
"code": 3
}
}
},
"message": "EARL 0 NF ASIC: Uncorrectable Parity error in Netflow Table.",
"observer": {
"name": "switchname",
"product": "Nexus",
"type": "switches",
"vendor": "Cisco"
},
"tags": [
"preserve_original_event",
"preserve_duplicate_custom_fields",
"forwarded",
"cisco_nexus-log"
]
}
Exported fields
| Field | Description | Type |
|---|---|---|
@timestamp | Event timestamp. | date |
cisco_nexus.log.command | keyword | |
cisco_nexus.log.description | keyword | |
cisco_nexus.log.euid | keyword | |
cisco_nexus.log.facility | keyword | |
cisco_nexus.log.interface.mode | keyword | |
cisco_nexus.log.interface.name | keyword | |
cisco_nexus.log.ip_address | ip | |
cisco_nexus.log.line_protocol_state | keyword | |
cisco_nexus.log.logname | keyword | |
cisco_nexus.log.network.egress_interface | keyword | |
cisco_nexus.log.network.ingress_interface | keyword | |
cisco_nexus.log.operating_value | keyword | |
cisco_nexus.log.operational.duplex_mode | keyword | |
cisco_nexus.log.operational.receive_flow_control_state | keyword | |
cisco_nexus.log.operational.speed | keyword | |
cisco_nexus.log.operational.transmit_flow_control_state | keyword | |
cisco_nexus.log.priority_number | long | |
cisco_nexus.log.pwd | keyword | |
cisco_nexus.log.rhost | keyword | |
cisco_nexus.log.ruser | keyword | |
cisco_nexus.log.sequence_number | long | |
cisco_nexus.log.severity | long | |
cisco_nexus.log.slot_number | long | |
cisco_nexus.log.standby | keyword | |
cisco_nexus.log.state | keyword | |
cisco_nexus.log.switch_name | keyword | |
cisco_nexus.log.syslog_time | date | |
cisco_nexus.log.terminal | keyword | |
cisco_nexus.log.threshold_value | keyword | |
cisco_nexus.log.time | date | |
cisco_nexus.log.timezone | keyword | |
cisco_nexus.log.tty | keyword | |
cisco_nexus.log.type | keyword | |
cisco_nexus.log.uid | keyword | |
data_stream.dataset | Data stream dataset. | constant_keyword |
data_stream.namespace | Data stream namespace. | constant_keyword |
data_stream.type | Data stream type. | constant_keyword |
event.dataset | Event dataset. | constant_keyword |
event.module | Event module. | constant_keyword |
input.type | Type of Filebeat input. | keyword |
log.file.device_id | ID of the device containing the filesystem where the file resides. | keyword |
log.file.fingerprint | The sha256 fingerprint identity of the file when fingerprinting is enabled. | keyword |
log.file.idxhi | The high-order part of a unique identifier that is associated with a file. (Windows-only) | keyword |
log.file.idxlo | The low-order part of a unique identifier that is associated with a file. (Windows-only) | keyword |
log.file.inode | Inode number of the log file. | keyword |
log.file.vol | The serial number of the volume that contains a file. (Windows-only) | keyword |
log.offset | Log offset. | long |
log.source.address | Source address from which the log event was read / sent from. | keyword |
tags | User defined tags. | keyword |
Changelog
| Version | Details | Kibana version(s) |
|---|---|---|
1.0.1 | Enhancement View pull request | 8.7.0 or higher |
1.0.0 | Enhancement View pull request | 8.7.0 or higher |
0.21.1 | Bug fix View pull request | — |
0.21.0 | Enhancement View pull request | — |
0.20.0 | Enhancement View pull request | — |
0.19.0 | Enhancement View pull request | — |
0.18.0 | Enhancement View pull request | — |
0.17.0 | Enhancement View pull request | — |
0.16.0 | Enhancement View pull request | — |
0.15.0 | Enhancement View pull request | — |
0.14.2 | Bug fix View pull request | — |
0.14.1 | Enhancement View pull request | — |
0.14.0 | Enhancement View pull request | — |
0.13.0 | Enhancement View pull request | — |
0.12.0 | Enhancement View pull request | — |
0.11.0 | Enhancement View pull request | — |
0.10.0 | Enhancement View pull request | — |
0.9.0 | Enhancement View pull request | — |
0.8.0 | Enhancement View pull request | — |
0.7.3 | Bug fix View pull request | — |
0.7.2 | Bug fix View pull request | — |
0.7.1 | Enhancement View pull request | — |
0.7.0 | Enhancement View pull request | — |
0.6.0 | Enhancement View pull request | — |
0.5.1 | Enhancement View pull request | — |
0.5.0 | Enhancement View pull request | — |
0.4.1 | Enhancement View pull request | — |
0.4.0 | Enhancement View pull request | — |
0.3.1 | Bug fix View pull request | — |
0.3.0 | Enhancement View pull request | — |
0.2.3 | Enhancement View pull request | — |
0.2.2 | Bug fix View pull request | — |
0.2.1 | Bug fix View pull request | — |
0.2.0 | Enhancement View pull request | — |
0.1.0 | Enhancement View pull request | — |